AG-1800 Aerosol Generator
OVERVIEW
The online monitoring and pretreatment system is applied to 24-hour
continuous online monitoring of on-site gas concentration. It is
equipped with a 7-inch high-definition color screen to display
on-site concentration, over standard on-site audible and visual
alarm (optional), remote signal GPRS, DTU, Lora, and another
transmission. The gas sensor of an internationally famous brand is
adopted. The main detection principles include gas sensors based on
the principles of electrochemistry, infrared, catalytic combustion,
thermal conductivity, PID photo ion, etc.
FEATURES
- Optional 1-6 kinds of compound gas detectors
- The concentration display unit can be switched freely
- A variety of communication methods are available
- Real-time monitoring via wired or wireless remote transmission,
network transmission; 3-wire 4-20mA standard signal and standard
bus RS485 (Modbus-RTU) output at the same time; optional frequency
output 200-1000Hz, Hart protocol signal, 1-5V output, 2-wire
4-20mA, SMS alarm, wireless transmission (2-5km or unlimited
distance); compatible with secondary instruments, data acquisition
modules, PLC, DCS system, can drive related equipment.
- Standard infrared remote control, through the infrared remote
control function keys, can be a one-touch operation, can realize on
dangerous occasions without opening the cover operation, such as:
modifying the alarm point, concentration calibration, zero
calibration, silence, restore factory, and other functions.
- Rich human-machine interface
- 1.7" HD color screen, display real-time concentration, alarm
status.
- High-temperature gas detection (optional)
- Optional high temperature and high humidity pre-treatment systems
can detect high-temperature flue gas.
- Data recovery function, you can select partial or full recovery in
case of misoperation
- The maximum value and minimum value can be set to be displayed or
not
- Multiple alarm modes, a multi-directional indication of alarm
status during alarm
- Include 2 groups of relay switch output, sound and light alarm
(optional), display visual alarm.
- Alarm types include concentration alarm, fault alarm.
- Multiple alarm mode settings: low alarm, high alarm, interval
alarm, weighted average alarm
- Misoperation identification function: concentration calibration
misoperation is automatically identified and prevented to avoid bad
human factors
- Zero-point automatic tracking, long-term use is not affected by
zero-point drift
- Multi-stage calibration of target point to ensure linearity and
accuracy of measurement
- Chinese or English interface can be selected
- Wide working temperature: -40～+70℃, support temperature
compensation
- Record calibration log, maintenance log, fault record,
troubleshooting countermeasures, sensor life expiration reminder,
next concentration calibration time reminder function.
- Intrinsically safe circuit design, explosion-proof, with secondary
lightning protection and anti-static capability. Meet national
standards and resist high-intensity pulse surge current impact.
With anti-reverse connection function. Meets EMI, EMC standards.
SPECIFICATION
Usable flow rate range: 1,500-65,000cfm (42-1,839.5m3/min)
Occurrence concentration: Flow rate 65,000cfm (at approx.
1839.5m3/min) Flow rate 6,500cfm (at approx. 183.95m3/min)
Particle generation: PAO, DOP, polydispersed
Generation method: Heating generation
Compressed gas (inert): Nitrogen, Argon, Carbon Dioxide or Helium
(50psi))
Power supply: AC220～240VAC,50/60HZ
Dimension: 280×390×300mm
Weight: approx. 14kg
APPLICATION
The pharmaceutical industry, electronics industry
Medical operating rooms, clean rooms
Pharmaceutical packaging and manufacturing
Food processing, scientific experiments
High-efficiency filter validation
Equipment certification, equipment monitoring
Biosafety cabinets, clean benches
Semiconductor Industry
FAQ
Q: When do you reply to messages?
A: We will reply to you with your inquiry in 24 hours.
Q: When do you send the products? And how do you send it?
A: For the small order, we will send out the goods within 5 days,
If have stock, we will send it immediately.
We send them by ups, FedEx, TNT, or DHL. For big order, normal is
20 days will finish.
Q: Do you accept OEM or revised logo, color, model, size?
A: Yes, we accept OEM for the qualified buyer. We can make the
products according to customer personal requirements.
Q: How about the quality of the management?
A: We have a complete quality control system, all of our products
will be fully pre-inspection by QC departments before,
shipping to you. We have the certification of ISO, CE we could send
the certification test of our company to you.
Q: How about your after-sale service?
A: After sending, we will track the products for you, until you get
the products.
When you got the goods, test them, and give me feedback.
If you have any questions about the problem, contact us, we will
offer the solve way for you.
