MS400 Four-in-One
Toxic and Harmful Gas Detector
OVERVIEW
MS400 Series Gas Detector is up to 4 potential atmospheric hazards
including oxygen, combustible and toxic gases, the types of gases
for detection are more than 500 types, MS400 is unparalleled in its
versatility, capability, and overall value.
Its adopted water-resistant line of portable gas detectors has
transformed the market with its matchless array of features.
FEATURES & BENEFITS
1. Compact Design, Easy to Use
Handy and durable, the MS400 is intuitive to operate
single-handedly using three function keys. The easy-to-read color
display clearly lays out all the information for you.
2. Large Data Storage Management, Release, and Documentation In No
Time
Standard configuration is the data storage capacity for 100, 000
entries.
Real-time storage and fixed time storage are supported, or only the
data of the alarm concentration will be stored.
It is supported to use the localhost to view, delete data, and
upload the data via USB interface to the computer for data analysis
or printing.RS485 communication is an optional configuration.
3. Clear signaling Design
The signal system of the MS400 is based on a clear color code:
sound & light alarm, vibration alarm, display screen visual alarm.
These are also documented in the data logger.
4. Specially Designed for Use With Its Internal Pump, Optimized for
Your Requirements
The MS400 is equipped with a very powerful internal pump.
It can be connected with hoses of up to 45 meters in length.
SPECIFICATION
| Gases to be detected | Arbitrary combination of 1 ~ 4 types of gases such as toxic gases,
oxygen gas, carbon dioxide, inflammable and explosive gases, TVOC,
and so on. Optional configuration: temperature and humidity measurements. |
| Detection range | 0 ~ 1, 10, 100, 1000, 5000, 50000, 100000ppm, 200 mg/L, 100%LEL,
20%, 50%, 100%Vol, can be selected; and other ranges can be
customized. |
| Resolution | 0.01ppm or 0.001ppm (0 ~ 10 ppm); 0.01ppm (0 ~ 100 ppm), 0.1ppm (0 ~ 1000 ppm), 1ppm (0 ~ 10000 ppm or more), 0.01 mg/l (0 ~ 200 mg/l), 0.1% LEL, 0.01%Vol, 0.001% Vol |
| Sensor service life | Electrochemical principle: 2 ~ 3 years; Oxygen gas: 2 years or 6
years can be selected; infrared principle: 5 ~ 10 years; catalytic
combustion: 3 years; thermal conductivity: 5 years; PID
photoionization: 2 ~ 3 years. |
| Response time | T90≤30 seconds | Recovery time | ≤30 seconds |
| Power supply | 3.6VDC, 4500mA high capacity rechargeable polymer battery |
| Display mode | 2.31-inch high-definition color screen |
| Protection level | IP65 |
| Explosion-proof mark | Exia II CT6 |
| Exterior dimensions | 160×70×28mm |
| Weight | 300 g |
APPLICATION
All the cases require the portable rapid detection of gas
concentrations such as petroleum, chemical, pharmaceutical,
environmental protection, combustion gas distribution, warehousing,
smoke gas analysis, air governance, and so on.
